That would be interesting. I used to have a case hardened shotgun. It was almost tiger striped. I think it was an H & R, don't remember what I did with it.
'94 Super V
- Thread starter JohnnyD
- Start date
Jon K.
Well-Known Member
Love the Serottas!
Thanks. I should attempt to count sometime, but Serotta and Cannondale are roughly equal in numbers in my collection.
JohnnyD
Well-Known Member
The vision is getting closer to the finish. Some of the final parts are ordered.
Wheels are OEM Cannondale DT Swiss rims and rear hub, with a Lefty. In white of course!
Drivetrain is the Box 2 Prime 9 with the 11-50T cassette. I am so close to the finish line. Frame is all primered, sanded and waiting on some warmer weather so the 2K white base coat and clear can cure properly. Only need a few odd and ends, chainring, disc rotor, and other frame bolts and I am done. Then it's on to the fun job of servicing all my other bikes. I just SO love cleaning and lubing bearings, adding sealant to the bikes with tubeless tires, ... yeah fun stuff.
Wheels are OEM Cannondale DT Swiss rims and rear hub, with a Lefty. In white of course!
Drivetrain is the Box 2 Prime 9 with the 11-50T cassette. I am so close to the finish line. Frame is all primered, sanded and waiting on some warmer weather so the 2K white base coat and clear can cure properly. Only need a few odd and ends, chainring, disc rotor, and other frame bolts and I am done. Then it's on to the fun job of servicing all my other bikes. I just SO love cleaning and lubing bearings, adding sealant to the bikes with tubeless tires, ... yeah fun stuff.
Attachments
What size chainring are you going to run? I've yet to try a 1X setup or even a double on a MTB.
JohnnyD
Well-Known Member
I run 32T on all my 1x setups with the exception of a 34T oval I have but isn't currently installed on anything now. It was on the F600 until I got the GRX 2x installed on it. I've found that when riding my bikes with 3x setups I spent most of my time riding on the middle chainring which is 32T, so that what I stick with.
Most of the newer Cannondale MTBs are equipped with 34T chainrings.
I was thinking more about the high and low gear ratios compared to a traditional 22/32/42 and 11-30 setup. Most of MTB rides involve some pavement riding, although I don't know how much time I spend in the 42/11 combination. Working from the low gear combination, 22/30 is roughly equal to 36/50.
JohnnyD
Well-Known Member
To be honest, the #1 reason I like to use 1x setup is that it's a whole lot more simple. The gear ratios aren't radically improved. Cable routing is simplified as well, beyond that there is nothing wrong with 2 or 3x systems.