IdahoBrett
Well-Known Member
I don’t know if it will help for your vintage of shifters. But I have a pdf bulletin for Suntour and it worked for the series on my 88 Black Lightning.
1991 SM1000 Project
- Thread starter Trav1s
- Start date
JohnnyD
Well-Known Member
I don't have any Suntour parts, but I saved it for the "just in case" I might someday need to reference it.
I'm wondering if someone could have replaced the original shifters with Shimano compatible ones. I don't know if there's a way to ID them. SunTour thumb shifters exist.
I have wondered about that. I was going to run them because they were on the bike and y'all know my feelings about the gripshift vibe. This morning I got fed up with it and when these showed up I made an offer that was accepted. I got them for under $30 shipped to my door. Project is on hold until these arrive. A local bike friend familiar with Suntour said I'm good with these.
Last edited:
The shifters arrived today and are really nice but will need a bit of work to them to shift better - no biggie. They are installed along with the original Suntour brake levers and Ergon grips. I tried my regular approach to setting them up and kept running into skipping gears or not shifting at all. I need to review the Suntour info shared by @IdahoBrett and give it try again. I also swapped a shorter stem to add to my comfort. I'm so excited to get this one on the trails.
JohnnyD
Well-Known Member
I'm interested in hearing how the first ride goes for you.
This is not forgotten nor have I disappeared.
I've somewhat unexpectedly been on the job hunt after a RIF. I've been using my new found free time I have to clean up and repair bikes that can be sold. Meanwhile, the SM1000 is waiting patiently off to the side for me to return to the project.
I've somewhat unexpectedly been on the job hunt after a RIF. I've been using my new found free time I have to clean up and repair bikes that can be sold. Meanwhile, the SM1000 is waiting patiently off to the side for me to return to the project.
Last edited:
After wrenching on the Jamis Renegade build the SM1000 made it back on the stand. I had been suspicious about RD hanger alignment during my last dance with the Suntour XC devil and decided to look closer at the entire drive side mount. I removed the wheel, RD, RD hanger, and looked closely at the frame only to see a slight bend on the bottom side towards the tire. I grabbed a large crescent wrench, closed the jaws around the frame, and then gently adjusted it with my finely calibrated eye. Reversed the process and shifting was improved but still off. I looked at the cable routing on the RD and it was wrong so I corrected my error, grabbed the previously referenced PDF in the thread, and did some more fine tuning. Much improved but still slow to move and hanging up between gears. I opened the shifter on the bar, applied Tri-flow, and shifted through the gears while on the stand. Much better! Don't love the Suntour shifters but they are now working much better and fit the vibe of the bike and will stay.
Time to adjust the saddle, figure out water bottle cages, and ride!
Time to adjust the saddle, figure out water bottle cages, and ride!
Last edited:
Good to hear that you're making progress on the shifting. The SunTour thumbshifters have always been good for me. I've had them on several bikes and never had a problem with them.
I need to get the planned changes (tires, etc.) done to my 1992 M1000 and get it out for some photos. It's nearly identical in spec to your bike with the exception of the shifters.
I need to get the planned changes (tires, etc.) done to my 1992 M1000 and get it out for some photos. It's nearly identical in spec to your bike with the exception of the shifters.
I am hoping the lube and use will improve the shifting and thus my contentment with most of the bike as delivered. The bike is safely hanging in the
About the same here in IL the past few days. Temps in the 90s and humidity in the 75% range. Air so thick that you can see haze in any view of any distance. I would have liked to mow some hay but it's not worth the effort in these conditions.